Audi A4

since 1994 release

Manual of the car



Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps of headlights
   Dismantle of a headlight
   Check of adjustment of headlights
   Fog lights
   Lamps of forward indexes of turns
   Back lamps
   Lamps of illumination of registration plate
   Lamp of illumination of salon
   Lamps for lighting of the control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics


7c8a7ef4



Replacement of lamps of headlights

Reverse side of the main headlight without fog lamp

1 – the socket for connection of all lamps;
2 – lamp of the main headlight;

3 – the engine for correction of a headlight.


Reverse side of the dismantled headlight

1 – the electric connecting socket for all lamps;
2 – protective cap;

3 – the engine for correction of a headlight.


Details of the sorted main headlight

1 – decorative diaphragm;
2 – protective rubber above;
3 – lens;

4 – sealing rubber;
5 – fixing clips;
6 – a reflector with the headlight case.


The lower fixing bolts (1 and 2) of the case of a headlight are available only after dismantle of a bumper and the case of the index of turn.

All glow lamps in headlights are dismantled from a motive compartment. For this purpose in a right headlight it is necessary to take out an air duct in the beginning.

Main and fog lights

 PERFORMANCE ORDER

  1. Take off a protective cap of a headlight in a motive compartment, having pressed both keys.
  2. Disconnect the wire socket from the glow lamp.
  3. Hang out a spring collar of an arm of a lamp and cast away it down.
  4. Take out the glow lamp.
  5. The new lamp depending on a headlight and the lamp has to be inserted as follows:
  6. Lamp of N 4 in a headlight without fog lamp: insert a lamp so that its three uvulas of contacts formed the letter "U" opened down.
  7. Lamps of N 7 in a headlight with a fog lamp: insert a lamp so that the plate shaft of a lamp was turned up vertically.
  8. Lamp of N 1 in a headlight with a fog lamp: insert a lamp so that the slanted party of a plate of a lamp sideways stood vertically and both cones entered openings on a headlight mirror.

Parking fires

 PERFORMANCE ORDER

  1. The same preparatory stage that it is described in the last section.
  2. Take out a cartridge of a lamp of parking fire from a reflector back.
  3. Slightly press a finger-shaped lamp (in a headlight without fog lamp) into a cartridge, turn to the left and take out.
  4. Just take out a lamp with a glass socle (in a headlight with a fog lamp) from the boss.