Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
- Lighting
Lighting check
Spare lamps
Replacement of lamps of headlights
Dismantle of a headlight
Check of adjustment of headlights
Fog lights
Lamps of forward indexes of turns
Back lamps
Lamps of illumination of registration plate
Lamp of illumination of salon
Lamps for lighting of the control panel
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics
|
Lamps of forward indexes of turns
Dismantle of cases of lamps, replacement of lamps
|
|
- For dismantle of the right index of turn remove an air duct.
- In a motive compartment near the case of a headlight cast away a safety latch of the index of turn.
- Wring out a fixing ledge of the case of the index of turn down.
- Push forward the case of a lamp of the index of turn.
- Slightly turn a cartridge of a lamp to the left and take out it back.
- Slightly press the glow lamp in the boss, turn it to the left and take out.
- Installation: press a cartridge in the case of the index of turn and turn to the right against the stop.
- At installation carefully push the case of the index of turn in the headlights directing on the case and insert ledges into grooves.
- Push a safety latch.
|
|
|
|
Council: At orange glow lamps of indexes of turns the way of connection differs from transparent lamps. Both ledges below on the boss of these lamps settle down not opposite to each other, and with shift to avoid a mistake. |
|
|
To dismantle the case of the index of turn from the headlight case, shift a safety latch (2) aside and press a fixing ledge (1) down. |
|
|
The case (3) indexes of turn with the taken-out cartridge (2) lamps. At installation of the case track that the directing ledges (1 and 4) were carefully pushed in the headlights directing in the case or on a wing. |
|
|
