Jacks
Sleva: the onboard jack (2) can be established only under the tags (1) which are squeezed out in metal in a car bottom fold. It belongs both to a lobby, and to a back part.
On the right: such false tripod is put only under a tag (1) too. In any case it has to stand behind an external fold of a body or on a longeron under a body. Not to damage a body, it is recommended to enclose between them a plate (2).
Jacks exist any cost and for the different purposes. Here different types are described:
Regular (onboard) jack: always enclose a small plate in order that the basis of a jack could not be pressed into soil.
Jack of parallelogrammny type: in this case only the steady model is recommended. Such jack is installed on the car which body in points of rise is already weakened. Such jack can be established a little further to the center of a body.
Hydraulic plunger elevator: before purchase check height of its rise. Too short model will not lift a wheel on the necessary height from the earth. And just you will not thrust too high elevator under the car.
Garage (mobile) jack: the short, small model which is not taking a lot of place best of all will be suitable for the motorist.
|
