Audi A4

since 1994 release

Manual of the car


Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
- System of injection
   - System of injection Motronic
      The major knots
      So the system of injection Motronic functions
      Violations in work and self-diagnostics
      The self-help at injection
      Visual control
      Search of malfunctions in separate knots
      Check of idling and exhaust gases
      Check of exhaust gases (AU)
      Cable of a butterfly valve
      The help at malfunctions
   + System of injection of MPI and MPFI
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics

7c8a7ef4


Cable of a butterfly valve

In salon the cable of a butterfly valve (1) with the nipple (3) under which the spring is enclosed is suspended in a bifurcate eye on the top end of the accelerator pedal (2) as it is shown here.


Valves of injection (5, 6, 7 and 8) are removed together with a distributive tube (3) and the regulator of pressure (4). For this purpose disconnect pipelines of giving (2) and return (1) of fuel and unscrew bolts of a distributive tube.


Management of a butterfly valve in the engine with a working volume of 1,6 l

The arrow indicates the nipple fixed by a fixing bracket on the end of a cable of a butterfly valve.

1 – cover of a cable of a butterfly valve;
2 – demountable clamp;

3 – countersupport;
4 – lever of a butterfly valve.

Arrangement of elements of management of a butterfly valve in a motive compartment (the engine of 1,8 l)

The arrow showed the nipple fixed by a fixing bracket on the end of a cable of a butterfly valve.

1 – cover of a cable of a butterfly valve;
2 – demountable clamp;
3 – countersupport;

4 – cable of a butterfly valve;
5 – lever of a butterfly valve.

The connecting cable between the accelerator pedal and a branch pipe of a butterfly valve should not be bent. During works in a motive compartment it is necessary to track that the disconnected cable was not difficult under an adverse corner owing to what it could be damaged.

Replacement of a cable of a butterfly valve

 PERFORMANCE ORDER

  1. In a motive compartment remove on the end of a cable a fixing bracket and in a point of fastening of a cover of a cable a demountable clamp.
  2. In salon dismantle facing under the control panel, see the head Salon at the left.
  3. Take out the fixing nipple of a cable of a butterfly valve from an eye in the top part of the accelerator pedal.
  4. Squeeze out a rubber tip from a back wall of a motive compartment.
  5. Turn a tip in a partition to salon on 90 ° to the left and take out it.
  6. Extend a cable of a butterfly valve.
  7. Do not bend a new cable of a butterfly valve at an insert of rubber tips in a partition.

Adjustment of a cable of a butterfly valve

 PERFORMANCE ORDER

  1. Wring out up to the end the accelerator pedal.
  2. Put the lever of a butterfly valve in position of full supply of gas.
  3. Insert a demountable clamp in corresponding to risk of a cover of a cable of a butterfly valve on a countersupport.
  4. At the lever of a butterfly valve at completely wrung out accelerator pedal the gap has to be at most 1 mm.

 Council: After a detachment of sockets of the control unit of system of ignition/injection Motronic, and also after shutdown of the accumulator in the control unit all sizes received as a result of so-called training are erased. Independent adaptation of the control unit to data of the engine "is forgotten", and there can be too high or unstable turns of idling. During a short trial trip the control unit "studies" adaptation to data of the engine. Though process of training is blocked if in the computer information on constant malfunction is brought. In this case in the beginning it is necessary to consider the memory device with malfunctions and to erase information. The sporadic defects arising, for example, at the expense of a detachment of the socket of some sensor do not interfere with training process.