Audi A4

since 1994 release

Manual of the car


Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
- Coupling
   Coupling functioning
   Coupling actuating
   Coupling check
   Check of hydraulics of coupling
   The help at malfunctions
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics

7c8a7ef4


Coupling check

Degree of wear of the conducted clutch plate cannot be defined in the mounted state. The first sign of existence of defect when coupling slips. You will notice coupling slipping at the movement on the highest transfer under loading in the beginning. The engine works at high turns, and speed at the same time does not increase. The following method which needs to be used only occasionally can offer a certain explanation:

Coupling slides?

 PERFORMANCE ORDER

  1. Put the emergency brake, start the engine.
  2. Put the 3rd transfer, slowly include coupling and give gas.
  3. At the faultless emergency brake the engine has to decay.
  4. If the engine works, coupling is faulty.

Coupling is correctly switched off?

If the transmission at the warm engine badly switches or process of gear shifting is followed by the scraping or roaring sounds, then probably coupling correctly is not switched off. Very seldom this effect is connected with malfunction of the transmission. To be sure, we will carry out an inspection on the 1st transfer or on transfer of a backing:

 PERFORMANCE ORDER

  1. Start the engine idling.
  2. Completely squeeze out a coupling pedal, wait about three a moment, then try to include the 1st transfer or a backing.
  3. If transfer joins hardly or the gnash is heard, then it means that coupling is switched off not purely, i.e. the conducted disk rotates not absolutely freely.
  4. Check hydraulic system of coupling and pump over it.
  5. Once again carry out an inspection.
  6. You will find information on other reasons of malfunctions in the section Help at malfunctions at the end of the head.