Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
- Fuel tank and fuel pump
For what ventilation of the fuel tank is necessary?
The fuel level indicator sensor in the fuel tank
Fuel-supply lines
The fuel pump with the electric drive
Dismantle of the petrol pump with the electric drive
Replacement of the fuel filter
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics
|
The fuel level indicator sensor in the fuel tank
|
|
The basic case photographed here is usually pasted in the fuel tank; but here it is shown for the sake of presentation separately. Dismantle of the fuel level sensor (1) is possible after pressing a key (shooter). The pressed key removes blocking (2). It is possible to take out the fuel level sensor. |
Here you see a deaf flange of the fuel tank under the luggage carrier bottom.
Sleva: are designated by figures:
1 – a returnable fuel pipe from system of injection;
2 – I will corrode connections of the fuel pump and the fuel level sensor;
3 – a fuel pipe of supply of fuel to system of injection.
On the right: the locking ring of the fuel level sensor unscrews the special tool (2) by means of a graggers (1) here.
|
|
Assembly provision of a deaf flange:
the arrow on a flange (1 or 2) has to be opposite to a mark in the fuel tank (3). In cars with the drive on forward and on all wheels in each case there is the corresponding arrow. |
The sensor is inserted from above into the case of an inlet collector in the middle of the fuel tank inside. How it works, you will find in the head Instrumenty and devices.
Because of a different form of the fuel tanks there are also different fuel level sensors for front-wheel and all-wheel drive models. Identification sign: the fuel level sensor with a rectangular float for models with the forward drive; the fuel level sensor for quattro – with a spherical float.
Dismantle of the fuel level sensor
|
|
Important: the fuel tank can be filled a maximum on 2/3, otherwise fuel will follow! |
|
|
- Cast away a floor covering of a luggage carrier.
- Unscrew a black metal cover.
- Mark a fuel pipe of giving and return of fuel – shooters on branch pipes fuel pipes show the direction of the movement of a stream.
- Remove both fuel pipes after opening of collars.
- Unscrew plastic cap nuts. Most often they sit very strongly. Therefore put, whenever possible, stupid screw-driver on an edge of a nut and weaken a nut easy blows of the hammer to the screw-driver handle. If it is necessary, establish it on different edges of a nut.
- Now it is possible to pull a little up a deaf flange of the fuel tank.
- If it is necessary, dismantle a returnable fuel pipe and an electric wire on a reverse side of a deaf flange.
- Mark the assembly provision of a hose and wire for the subsequent assembly.
- Now undertake the fuel tank a hand and take out the sensor, having at the same time wrung out a fixing ledge from the case of an inlet collector.
- Disconnect the socket of the fuel level sensor on a deaf flange.
- Before assembly moisten with gasoline a sealing ring of a deaf flange.
- Assembly provision of a deaf flange: the arrow on a flange has to be opposite to a mark in the fuel tank. Cars with the drive on forward and on all wheels have own arrow for each case.
|
|
|
|
