Audi A4  + Running gear  + Regular servicing  + Engines  + Turbo-supercharging  + System of an exhaust  + Cooling system  + Fuel tank and fuel pump  + Air filter and channels of absorption  + System of injection  + Coupling  + Transmission and main transfer  + Suspension bracket of wheels and steering  + Brakes  + Wheels and tires  + Electrotechnical equipment  + System of ignition  + Lighting  +  Alarm equipment  -  Tools and devices     Check of control tools and bulbs     The combined device     Speedometer     Tachometer     Hours     Indicator of amount of fuel     Indicator of temperature of cooling liquid     Auxiliary devices     Control bulbs above in the combined device     Control bulb of cooling liquid     Control bulb of level of brake fluid     Control bulb of pressure of oil     Control bulb of indexes of turns     Control bulbs in devices of a round form (and nearby)     Control bulb of indexes of turn on the trailer     Control bulb of ASR     Control bulb of the lock of ignition     Control bulb of high beam headlamps     Control bulb of a safety cushion     Control bulb of ABS     Control bulb of the parking brake     Control bulb of accumulator charging     System of autocontrol of the car     Switches     Ignition lock     Check of switches     Alarm buzzer of lighting     Lighter     The warmed back glass     Check of screen wipers and windscreen washers     Engine of screen wipers     The help at malfunctions     The gulf of liquid for washing of glasses     System of washing of headlights     Adjustment of a mirror with the electric drive     Central lock     Window regulators with the electric drive     Sliding/removable roof with the electric drive     Radio receiver     The antenna on back glass  + Heating and ventilation  + Body details  +  Salon 
  Search of malfunctions 
  Technical characteristics 
  
       
 | 
 
  
Indicator of amount of fuel  
On the control panel the level of fuel is shown an electric way.  
  The deviation of an arrow of the indicator of amount of fuel changes by means of contact with weight. It is provided with the fuel level sensor which depending on filling of the fuel tank has higher or low resistance. Giving of tension and preparation of a signal for the fuel level sensor is provided with the central microprocessor of the combined device. Information on dismantle of the fuel level sensor you will find the Fuel tank and the fuel pump in the head.  
Violations in operation of the indicator of amount of fuel  
-  The raised or lowered indications: the float of the fuel level sensor is incorrectly established (see the following section), or are not established the amendment (V.A.G 1551). 
 
-  There are no indications: the arriving tension out of the range of the combined device, either the level sensor, or the indicator are faulty. 
 
 
The indicator of amount of fuel or the fuel level sensor is faulty?  
| 
 | 
 
-  Bare sockets of wires of the fuel level sensor (the head the Fuel tank and the fuel pump), disconnect the mnogoshtyrkovy socket. 
 
-  Connect an auxiliary wire to the socket of a violet/black wire and apply directly to weight. 
 
-  For a short time include ignition. 
 
-  If the arrow of the indicator deviates completely, then the wire as it should be bringing and the indicator. Then the fuel level sensor remains a cause of defect. 
 
-  If the arrow remains in situation "is empty", then malfunction in the bringing wire, in a wire of the combined device or the indicator of amount of fuel. Fuel level sensor probably as it should be. 
 
 
 | 
 
 
 | 
 
 
Check and adjustment of the indicator of fuel  
| 
 | 
 
-  Bare sockets of wires of the fuel level sensor. 
 
-  Disconnect the socket and measure by an ohmmeter resistance on the socket of the fuel level sensor: 
 
-  Buck is stout: 40 Ohms. 
 
-  Buck is stout half: 115 Ohms. 
 
-  Tank reserve: 250 Ohms. 
 
-  If the received results of measurement completely differ from set, then: the fuel level sensor is faulty. 
 
-  If results of measurement as it should be, but indications of the indicator of amount of fuel have a big error or not indications, then: there is no conductivity or the device is faulty. 
 
-  Results of measurements are close or the indicator is inexact: the float of the fuel level sensor is incorrectly adjusted. 
 
-  Installation of a float of the fuel level sensor: it is work for a workshop which can carry out adjustment by means of the device for reading of errors of V.A.G 1551. In certain borders it is possible to make the following: 
 
-  Dismantle the fuel level sensor. 
 
-  If the indicator of amount of fuel overestimates data, then: slightly turn in the float lever up. 
 
-  If the indicator of amount of fuel underestimates data, then: slightly turn in the float lever down. 
 
 
 | 
 
 
 | 
 
 
 | 
 
 
  
 |