Audi A4

since 1994 release

Manual of the car



Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and gap in heads of cross steering draft
   Check of dustproof caps of hinges of an axis
   Check of a side play of a steering wheel
   Check of a maple belt
   Check of level of oil
   Check of a gap of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Replacement of the shock-absorber behind
   Steering
   Works on steering
   Check of tightness of a servoupravleniye
   Poliklinova belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Dismantle of the pump of a servoupravleniye
   Filling and pumping of system of a servoupravleniye
   Safety cushion
   Instructions of safety
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics


7c8a7ef4



Adjustment of the steering mechanism

 PERFORMANCE ORDER

  1. Put wheels directly.
  2. Let your assistant will rotate to the left and to the right the steering wheel about average situation – is heard knock or clicking.
  3. At the same time carefully and slowly turn an adjusting bolt (screwing up) to the right until clicks in the car disappear.
  4. Carry out a trial trip: steering should not have the heavy course in one of provisions or especially be got jammed. Otherwise replace the steering mechanism.

Replacement of a dustproof cuff of the steering mechanism

The cuff of the steering mechanism can be replaced at the installed steering mechanism.

 PERFORMANCE ORDER

  1. Dismantle a head of cross steering draft.
  2. Press through hose collars.
  3. Remove an old dustproof cuff.
  4. Pull a new rubber ring of round section and a new dustproof cuff.
  5. Put new hose collars.
  6. Fix cross steering draft.