Audi A4

since 1994 release

Manual of the car


Audi A4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
   Front bumper
   Damages to result of accidents
   Frontal part of the car
   Cowl
   Wings
   Side levels
   Doors
   Dismantling of doors
   Mirror of the external review
   Trunk lid
   Rear bumper
   Sliding/removable roof
   Check of a corrosion-resistant coating of the bottom
   Clearing of openings for a water drain
+ Salon
Search of malfunctions
Technical characteristics

7c8a7ef4


Rear bumper

Dismantle

For dismantle of a rear bumper it is necessary to weaken on the right and left side of the car two screws with crosswise heads (1 and 2).


 PERFORMANCE ORDER

  1. Cast away a floor covering of a luggage carrier.
  2. Unscrew in a luggage carrier two bolts with six-sided heads on the right and at the left.
  3. Take out lateral faces of a bumper from arms on a body. For this purpose strongly press a bumper sideways down and at the same time pull it for the upper edge from a body.
  4. Wring out a bumper for both ends over wheel niches and remove back.
  5. At installation of a bumper insert back fastenings in the beginning.
  6. In the beginning insert lateral faces of a bumper into an arm on a body bottom edge. Then press lateral faces of a bumper sideways up to that time until the arm enters a groove.
  7. Then level a bumper and screw up bolts.

 Council: Arms of a rear bumper are executed at the same time as shock-proof shock-absorbers – they are deformed at collision and protect structure of a body.